-
- Thule 511-1 / 590 v2: ****e product warning
- So I finally got the Thule bike carrier I ordered. I'm very disappointed. Dig this: the bar and the locking head are held by only one screw. The locking head, which holds most of the bike's weight, and more importantly maintains it vertical, it held...
- Front Derailleur Question...
- Ok, recently I installed a new front derailleur on my Trek 1000 -- it's a Tiagra, to replace the 2203. It seems to be heads and tails above the 2203, but I have an adjustment question. It (the derailleur) was riding just a little too low on the seat-...
- Drivechain
- My drivetrain makes a really annoying and spooky popping sound when my driveside arm gets about 90* to the chain stay. Ive got a new freewheel, a slightly straight chainwheel, and a new chain can anyone help me? (锕侊箒)~~~~--------------------------...
- dura ace headset issues.
- so, one of my frames came with a lovely oldschool dura ace headset. the headset has a little plastic ring that protects the precious cartridge bearings. some mother ******** as*hole locked next to me last night and broke this ring. now i'm riding aro...
- Change fork
- maybe wrong title for this but I have a problem... Before I had old bicycle and it was easy to change fork since there was old system (screw adn pull) to do this... Now I have new bike and I see new system and I don't know how to get out my stock for...
- Wheel truing without a truing stand -- HELP!
- I have been experimenting at wheel truing using the brakes as the poor-man's truing arms, and have gotten quite adept at lateral truing. However, I am finding it rather difficult to true the wheel radially using this method, because I can't seem to f...
- headset cup won't stay pressed in headtube - potential to damage frame b riding
- This should be my last headset post. Thanks to those who have stuck with me through a variety of rather specific questions. I removed the original 105 balls-with-retainers headset from the Centurion that I bought on eBay, because I couldn't get the h...
- Skinny tire/fat tube?
- I need to go out and run some errands, but first fix my flat. I'm all out of patches, and my old tube already has three on there, so its time for a new tube. The only one thaty I have though is a 700x28-35. Do you think that I'd be ruining a perfectl...
- Rear Derailleur Skipping Problem
- I have new 6 speed bike and there is some shifting problem in the rear derailleur. The chain is not shifting from the 6th gear(sprocket) to 5th(sprocket) when I change the gear from 6 to 5.When I change 4th to 5th gear, the chain directly go to the 6...
- Profile-Design's Parts Bin....?
- I was able to pick up an older set of Profile Airstryke ZB aero bars for $1.00. Only thing is that the clamps top half of the clamps and bolts are missing. Does anyone know if you can get replacement parts for older models directly from Profile-Desig...
- my rear tire keeps loosing air...
- at a very slow pace, of course, but it happens. even while just sitting idle. i bought the road bike and took it to the kitchen for a tune up. it was in decent shape and all i had to do was adjust the derailuer, set the brakes and lube it up. i also...
- Tightening threadless headset
- I've got a stronglight headset that now has some play when the front brake is applied, and I rock the bike back and forth. I know it needs tightening, but I don't want to screw it up.. I would just take it to the lbs tommorow, but alas...its closed,...
- tightening shifters
- Hi , i decided to move my shifters up for a more comfortable position , and after doing so i found out that the tightening torque for shifters is 10nm. I definitely tightened it more than 10nm. I read somewhere that shifters should be really tight be...
- Gearing to alleviate knee problems
- My girlfriend's started having some knee pain after commuting for about a year on the bike I got her (10 mi round trip or so). Her bike has a 39/53 road crankset and 14-24 7-speed freewheel. I'd like to figure out the easiest way to lower the gears f...
- Anybody make a Campy compatible 11-25 cassette?
- in a 10 speed? 11-26 or 27 would even be better! (锕侊箒)~~~~---------------------------------------------------------------------- Marchisio http://www.marchisioengineering.it/ have a system that allows you to build up any ratios you like as well as...
- Need More info for 27 to 700c Conversion
- I am hoping to convert my Fuji Touring Edition 3 (Unknown Vintage) from its current 27 wheelset to 700c. I would like to be able to use the brouder selection of tires available in 700c (including studded for winter riding). I am having a hard time fi...
- 1 [2] [3] [4] [5] [6] [7] next
